Product explanation:
This tester is a integrated tester for plug. It is used to test the continuity, polarity, insulation, high-volt, leakage current, high current on E-wire of power plug. It meets the requirements of many international standards such as BIS, UL, CSA, VDE, BSI, DIN, CCC, IEC, etc. It is a totally automatic testing machine makes your operation more convenient and simple.
Features:
* All of the test subjects will done automatically.
* The inner/outer high-volt output value and persistence period can be adjusted separately.
* Test speed very quick, all test subjects will be achieved less than 2 seconds.
* The PLC control system comes from Mitsubishi, Made In Japan.
* The relay comes from Schneider, Made In French.
* If the specimen is incompetent, there is a alarm by buzzer and light.
* If the specimen is incompetent, this machine will stop at once and show you which subject is incompetent. Until you push the emergency button, it will restart a new test. And a switch with key can be made to order to replace the high-volt starting button, it is very useful, because when a alarm happen, the operat0rs can not restart this machine, only after the managers have checked over and restart it by the key the machine will work again.
* When test over, the sample will be pushed out automatically, and a "" or other characters will be marked on it(English characters only).
* A big current with 25A will be applied on E wire to check if it is eligible.
Technical parameter:
| Polarity test |
Test E,L,N wires in sequence |
| Insulation test high-volt |
DC 500V +- 10% |
| Insulation resistance |
2,7,20,50,100MΩ(can be made to order) |
| Inner high-volt |
0~5KV +-5% (adjustable) |
| Outer high-volt |
0~5KV +-5% (adjustable) |
| Leakage current |
0.5,1,3,5,10mA(can be made to order) |
| Rated power |
500VA |
| E-wire test current |
25A |
| Cylinder power |
compressed air with 0.4 to 0.6Mpa |
| Dimensions |
675mm W,480mm D,520mm H |
| Power source |
AC 220V +-10%,50Hz |
| Weight |
35 kg, approximate |
NOTICE:
1, Inner high-volt is applied between L,N,E wires, and the outer high-volt is applied between L,N,E wires and jacket.
2, Both 3-wire and 2-wire power plug can be tested by this machine.
Test Objects:
Power Plugs
Audited Supplier 
){kind=link}
){kind=link}